Accessory Connections; External Speakers - Kenwood TM-733A Instruction Manual

ACCESSORY CONNECTIONS
EXTERNAL SPEAKERS When using 1 external speaker connected to
speaker jack 1:
If you plan to use external speakers, choose speakers
with an impedance of 8 Q. The external speaker jacks Conti z =
accept 3.5 mm diameter mono (2-conductor) plugs.
Recommended speakers include the SP-50B and VHF Band VHF Band
SP-41, (Internal Speaker) (External Speaker)
' j Itchi UHF Band UHF Band
m Recolve Audio Switching (External Speaker) (Internal Speaker)
A variety of speaker configurations are possible by
using either 1 or 2 external speakers. The Audio
Switch function allows you to select the exact
configuration that you like best.
Press [F] (1 s), [CONT SEL] to toggle between
Configuration 1 or Configuration 2 as described in
the charts.
When using 2 external speakers:
Configuration 1 Configuration 2
VHF Band VHF Band
(External Speaker 1) (External Speaker 2)
* Connecting 1 external speaker to speaker jack 2 °
will provide audio from both the VHF and UHF UHF Band UHF Band
bands through your external speaker. (External Speaker 2) (External Speaker 1)