Roland M-GS64 Owner's Manual page 9

To select Matrix 2 (Drum setup parameters)
Hold down the Select button and press the F2 button.
The F2 indicator will blink.
Part Param1 0 Dr1 Level JOr1 Pan jon Rev fen Cho
Part Param 2 0 pen Dly porn Pitch fon Asgn| 7
Master fo) [Dr2 Level] Dr2 Pan jer2 Rev Eas Cha
MIDI Rx o
[22
dy [Ore Pitch "Eas anf -
Oflashing:®:
Select F2 FoF.
To select Matrix 3 (Effect parameters)
Hold down the Select button and press the F3 button.
The F3 indicator will blink.
To select Matrix 4 (Utility)
Hold down the Select button and press the F4 button.
The F4 indicator will blink.
Part Parami1 0 [in Mode [Backup flnitialize [Bulk Dump
Part Param2 0 [Prew tLbree Vel Bette one
Master oO PMute Lock} - [EQ Lock Out Assign Lock
MIDI Rx ° bee Mode [Rx GS R Rx GM fMod
Slashing a
Select i} F3
To select Matrix 0 (the basic menu), hold down the Select button
and press the function button whose indicator is blinking.
If no indicator is blinking, Matrix 0 is already selected.
@ Selecting a Parameter
In this example, the Vib. Rate parameter is selected.
Part Param1 o [Delay [Pat ModefIWP Mee §Map Sel
Part Param2 ¢ Vib Rate fVib.Depth vib Delay
Master o [B.Range | - _ [Cutoff | Reso
MIDI Rx oO ModDep. | Aygack | Bee Pesee
flashing®:
Select Ama F2