Table of Contents
Advertisement
number will not sound simultaneously. If the M-GS64 receives
MIDI messages that would cause two or more instruments to be
playing simultaneously, the first-played instrument will be
turned off before the next-played instrument is sounded. For
example, it is not possible on a real-world drum set for both
open hi-hat and closed hi-hat sounds to occur simultaneously.
Such sounds can be set to the assign group of the same number.
The assign group can be set to Non or 1127. When an instru-
ment's assign group is set to "Non," that instrument will not be
turned off as a result of another instrument playing. In other
words, with a setting of "Non," assign group processing wil! not
be done for that instrument.
* Be aware that if you select a different drum set, the parameter
values will be initialized.
The Drum 2 setting parameters are given below. The setting
method is identical to the Drum 1 parameters.
* If Part Mode is not set to Drum 2, the display will indicate "—~".
@ Dr2 Level (Drum 2 Level) : 0 - 127
@ Dr2 Pan (Drum 2 Pan) : Rnd, L63 - 0 - R63
@ Dr2 Reverb (Drum 2 Reverb Level) : 0 - 127
@ Dr2 Chorus (Drum 2 Chorus Level) : 0 - 127
@ Dr2 Delay (Drum 2 Delay Level) : 0 - 127
@ Dr2 Pitch Coarse (Drum 2 Pitch Coarse) : 0 - 127
® Dr2 A Group (Drum 2 Assign Group) : Non, 1 - 127
@ Saving a Drum Set That You Create..........cscceee
You can modify the parameter values of drum sounds, and save
your new settings as a Drum Set. Drum Sets created in this way
are called User Drum Sets. Two such drum sets can be stored,
but since each set contains 84 (*) instrumental sounds, this pro-
vides a total of 168 instrumental sounds (drum instruments).
User drum sets can be stored in Map 1 drum set numbers 65 and
66.
(*) Each instrument in a drum set is assigned to a key (note) in
the range of note numbers 25 to 108. (Drum set list p. 31)
®@ Saving a Drum Instrument (Procedure 1)
Press ~@@ or B> to select the User Drum Set number (65/66).
To finalize the User Drum Set number, press the Enter button
To cancel, press the Exit button.
To save the settings, press the Enter button.
To cancel the save operation, press the Exit button.
14
Procedure 1
=
i.
Lo
t
]
50
:
es
he
53
4 a ac)
-—
aaa
cea
a —
caleo
ls2
al
i
{
f
'
helewtels
65 66
Note number
User Drun Set number
@ Saving a Drum Instrument (Procedure 2)
This procedure saves the edited drum instruments for the entire
Drum Set that is currently selected.
To save, press the Enter button.
To cancel the save operation, press the Exit button.
Procedure 2
65
66
User Drun Set number
|
Advertisement
Table of Contents
