M4 x .7 x 10 mm philips head screw H 504-2014 M4 x .7 x 20 mm philips head screw Visit the Westinghouse Web Site at www.westinghousedigital.com Installation and Assembly - Swivel Wall Arm for LCD screens 1 of 6 Model: MT25 ARM9 Max.
Page 2
• Never tighten in excess of 80 in • lb (9 N.M.). • Make sure that mounting screws are anchored into the center of the studs. The use of an "edge to edge" stud finder is highly recommended. Visit the Westinghouse Web Site at www.westinghousedigital.com KNOB WALL BRACKET...
Page 3
(up to 5/8" thick) must be counterbored as shown below. If plaster/drywall is thicker than 5/8", custom fasteners must be supplied by installer. Visit the Westinghouse Web Site at www.westinghousedigital.com WARNING WALL BRACKET...
Page 4
M4 x 12 mm screws (F) instead of four M4 x 10 mm screws (G). Note: Screen may appear slightly different than illustrated Visit the Westinghouse Web Site at www.westinghousedigital.com ® compliant hole TILT/ADAPTER PLATE...
Page 5
Next route through and between pivot bracket and tilt/ adapter plate. Adjust tilt and secure pivot bracket to tilt/adapter plate with knob. Visit the Westinghouse Web Site at www.westinghousedigital.com LCD SCREEN TILT/ADAPTER PLATE...
Page 6
REPAIR OR REPLACEMENT – For a period of five (5) years from the original date of purchase, Westinghouse Digital Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product.