M4 x .7 x 10 mm phillips screw H 504-2014 M4 x .7 x 20 mm phillips screw 590-5003 retaining spacer Visit the Westinghouse Web Site at www.westinghousedigital.com Installation and Assembly - Flat/tilting wall mount for LCD screen Maximum Load Capacity: 25 lb (11.4 kg)
Page 2
• Make sure that mounting screws are anchored into the center of the studs. The use of an "edge to edge" stud finder is highly recommended. Visit the Westinghouse Web Site at www.westinghousedigital.com 2 of 5 ISSUED: 04-16-04 SHEET #: 095-9193-1 For customer service call 1-866-287-5555.
Page 3
Visit the Westinghouse Web Site at www.westinghousedigital.com Drill hole and insert anchor (F) Place wall bracket (A) over anchor (F) and secure with...
Page 4
Note: Refer to your TV owner’s manual for additional instructions which may pertain to the positioning of your specific TV. Visit the Westinghouse Web Site at www.westinghousedigital.com FOR VESA 100 MOUNTING PATTERN: 1. Choose hole pattern indicated below. 2. Attach tilt bracket (B) to back of screen using four 10 mm screws (G) as indicated below.
Page 5
REPAIR OR REPLACEMENT – For a period of five (5) years from the original date of purchase, Westinghouse Digital Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product.