Advertisement
WORK
Installing the battery
3.6
Installing the front fender
3.7
Opening filler cap
3.8
Closing filler cap
3.9
–
Place the battery in the battery holder.
(450 SX‑F EU, 450 SX‑F USA)
Condition
External temperature: ≥ 10 °C (≥ 50 °F)
3Ah battery (YTX4L-BS)
Condition
External temperature: ≤ 10 °C (≤ 50 °F)
4Ah battery (YTX5L-BS)
500069-11
(450 XC‑F USA, 505 XC‑F USA)
4Ah battery (YTX5L-BS)
–
Reconnect the rubber band
–
Attach the plus cable and replace the plus pole cover
–
Attach the minus cable
–
Mount the seat. (
–
Ensure that the spacing sleeves are mounted in the fender.
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
Info
Take care with the contact between the holding lugs and the start number
plate.
500092-10
–
Press release button
400199-10
–
Replace the filler cap and turn clockwise until the release button
Info
Run the fuel tank breather hose
400199-11
.
.
p. 5)
M6
, turn filler cap counterclockwise and lift it free.
without kinks.
.
.
10 Nm (7.4 lbf ft)
locks in place.
7
Advertisement
