SET‑UP
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well-
ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery
800035-10
acid gets in the eyes, rinse with water for at least 15 minutes and con-
tact a physician.
–
Fill the battery.
Info
Adhere to the instructions in the separate battery enclosure.
–
Recharge the battery. (
–
Install the battery. (
(450 SX‑F USA, 450 XC‑F USA)
Install the front fender. (
(450 SX‑F EU)
–
Apply the label.
800038-10
–
Mount the engine guard.
Guideline
Remaining screws, chassis
800036-10
–
Mount the frame guard.
Info
Adhere to the KTM PowerParts installation instructions included.
–
Mount the hand guard.
Info
Adhere to the KTM PowerParts installation instructions included.
800039-10
–
Mount the handlebar protection.
–
Fill up with fuel. (
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
p. 6)
p. 7)
p. 7)
M6
p. 8)
4
10 Nm
(7.4 lbf ft)