Section 2 - Safety Information; Introduction; Signal Words - Scag Power Equipment STCII-61V-36BV Operator's Manual

Section 2

2.1 INTRODUCTION

Your mower is only as safe as the operator. Carelessness
or operator error may result in serious bodily injury or death.
Hazard control and accident prevention are dependent
upon the awareness, concern, prudence, and proper
training of the personnel involved in the operation, transport,
maintenance and storage of the equipment. Make sure
every operator is properly trained and thoroughly familiar
with all of the controls before operating the mower. The
owner/user can prevent and is responsible for accidents or
injuries occurring to themselves, other people or property.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions on this
product and in the manual to avoid personal injury or death.
READ THIS OPERATOR'S MANUAL AND USE THE
QR CODE BELOW TO WATCH THE SAFETY VIDEO
BEFORE ATTEMPTING TO START YOUR MOWER.
MAKE SURE THAT EVERYONE KNOWS WHERE THE
MANUAL IS LOCATED AND KEEP A RECORD OF
EACH EMPLOYEE THAT HAS READ THE MANUAL.
Figure 2-1. SAFETY VIDEO QR CODE
A replacement manual is available from your authorized
Scag Service Dealer or by contacting Scag Power
Equipment, Service Department at P.O. Box 152, Mayville,
WI 53050 or contact us via the Internet at www.scag.com.
The manual for this machine can be downloaded by using
the model and serial number or use the contact form to
make your request. Please indicate the complete model
and serial number of your Scag product when requesting
replacement manuals.
SAFETY INFORMATION
3

2.2 SIGNAL WORDS

This symbol means "Attention! Become Alert! Your
Safety is Involved!" The symbol is used with the following
signal words to attract your attention to safety messages
found on the decals on the machine and throughout this
manual. The message that follows the symbol contains
important information about safety. To avoid injury and
possible death, carefully read the message! Be sure to
fully understand the causes of possible injury or death.
SIGNAL WORD:
It is a distinctive word found on the safety decals on the
machine and throughout this manual that alerts the viewer
to the existence and relative degree of the hazard.
DANGER
The signal word "DANGER" denotes that an extremely
hazardous situation exists on or near the machine that
could result in high probability of death or irreparable injury
if proper precautions are not taken.
WARNING
The signal word "WARNING" denotes that a hazard exists
on or near the machine that can result in injury or death if
proper precautions are not taken.
CAUTION
The signal word "CAUTION" is a reminder of safety
practices on or near the machine that could result in
personal injury if proper precautions are not taken.
Your safety and the safety of others depends significantly
upon your knowledge and understanding of all correct
operating practices and procedures of this machine.
R