Related Manuals for NCR VOYIX 7772-K461
Summary of Contents for NCR VOYIX 7772-K461
- Page 1 2x20 Customer Display, CX Kit Instructions 7772-K461 Issue B Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
- Page 3 Table of Contents Copyright 2x20 Customer Display, CX Kit Contents Installation Procedure Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 4 Revision Record Issue Date Remarks Jun 2020 First Issue Dec 2021 Updated 2x20 Customer Display and Cable PNs, and procedure Added Warning statement Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 5 2x20 Customer Display, CX This kit provides a 2x20 Customer Display for the NCR CX7 All-in-One POS (7772) or NCR CX5 All-in-One POS (7773). Kit Contents Item Part Number Description 497-0531770 2x20 LCD Customer Display 497-0531195 Y-Cable, 5977 Powered USB 445-0744459...
- Page 6 Remove the two (2) screws that secure the Cable Cover to the Back Cover. b. Rotate and unhook the Cable Cover from the Back Cover. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 7 Remove the Ethernet Cable from the Cable Management Hook then disconnect the Cable. 4. Loosen the two (2) captive screws that secure the Back Cover to the Display. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 8 5. Rotate the Back Cover away from the Display and unhook the Back Cover Tabs. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 9 6. Lift the bottom of the Logo Badge to unsnap it from Port D of the display housing. 7. Route the Cable through the Bracket recess and install the Bracket on the display housing (2 screws). Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 10 9. Reinstall the Display Back Cover. 10. Reconnect the 180-degree USB-C Cable and Ethernet Cable. 11. Reinstall the Cable Cover. 12. Pivot the Customer Display into position. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.