Scag Power Equipment PATRIOT SPZ-52H-22FX Operator's Manual page 19

Section 4
6. Hourmeter (Figure 4-1). Indicates the number of
hours the engine has been operated. It operates
whenever the engine is running. Has preset
maintenance reminders for engine and hydraulic
system oil changes. Will start flashing scheduled
maintenance 2 hours before preset time and
continue flashing until 2 hours after. Automatically
resets.
7. Fuse Holders (Figure 4-1). Two 20-amp fuses
protect the mower's electrical system. To replace
fuses, pull fuse out of the socket and install a new
fuse.
8. Left Steering Control (Figure 4-1). Use to control
the mower's left wheel when traveling forward or
reverse.
9. Right Steering Control (Figure 4-1). Use to control
the mower's right wheel when traveling forward or
reverse.
10. Brake Pedal (Figure 4-1). Depressing the brake
pedal applies the brake.
11. Parking Brake Lock Latch (Figure 4-1). Use to
lock the parking brake in the engaged position.
Fully depress the brake pedal and pull the parking
brake lock latch back to lock the parking brake in the
engaged position. See Figure 4-2. Fully depress the
brake pedal forward to disengage the parking brake
lock latch, then release the brake pedal to disengage
the brake. See Figure 4-3.
PULL BACK ON
PARKING BRAKE
LATCH
PUSH BRAKE
PEDAL FORWARD
Figure 4-2. Engaging the Parking Brake
PUSH BRAKE PEDAL
FORWARD THEN RELEASE
PEDAL TO DISENGAGE
Figure 4-3. Releasing the Parking Brake
12. Dump Valve Control Levers (Figure 4-4). Located
on the left and right side of the bumper, used to
"free-wheel" the mower. Rotating the levers forward
into the notch (towards the front of the mower)
allows the unit to move under hydraulic power.
Rotating the levers backward to the notch (towards
the rear of the mower) allows the mower to be
moved by hand (free-wheeling).
"DRIVE" POSITION
Figure 4-4. Dump Valve Control
15
DUMP VALVE
CONTROL LEVER
R