Section 4 - Operating Instructions; Controls And Instrument Identification - Scag Power Equipment PATRIOT SPZ-52H-22FX Operator's Manual

R
WARNING
Do not attempt to operate this mower unless you
have read this manual. Learn the location and
purpose of all controls and instruments before
you operate this mower.
4.1 CONTROLS AND INSTRUMENT
IDENTIFICATION
Before operating the mower, familiarize yourself with all
mower and engine controls. Knowing the location, function
and operation of these controls is important for safe and
efficient operation of the mower.
IGNITION
SWITCH
ENGINE
CHOKE
CONTROL
ENGINE
THROTTLE
CONTROL
MOWER
DECK
SWITCH
OPERATING INSTRUCTIONS
BRAKE
PEDAL
PARKING BRAKE
LOCK LATCH
LEFT STEERING
CONTROL
Fuse holder
HOUR METER
MOWER DECK
DUMP VALVE
Figure 4-1. Controls and Instruments
1. Ignition Switch (Figure 4-1). The ignition switch
is used to start the engine and has three positions;
OFF, ON, and START.
2. Mower Deck Switch (Figure 4-1). Use to engage
and disengage the mower drive system. Pulling up
on the switch will engage the deck drive. Pushing
down on the switch will disengage the deck drive.
3. Engine Choke Control (Figure 4-1). Use to start a
cold engine.
4. Engine Throttle Control (Figure 4-1). Use to
control the engine speed. Pushing the lever forward
increases engine speed. Pulling the lever back
decreases engine speed. Full back position is the
IDLE position. Full forward is the cutting position.
5. Fuel Gauge (Figure 4-1). Indicates the amount of
fuel in the fuel tank.
DECK LIFT
SEAT BELT
14
Section 4
CUTTING HEIGHT
ADJUSTMENT
CUTTER DECK
RELEASE LEVER
RIGHT STEERING
CONTROL
FUEL GAUGE
SEAT HOLD DOWN
RELEASE LATCH
DUMP VALVE