Safety Notice; Compliance Statement; General Descriptions; Related Service Information - BenQ W700 Product Service Manual

Safety Notice

1 Make sure your working environment is dry and clean, and meets all government safety
requirements.
2 Ensure that other persons are safe while you are servicing the product.
3 DO NOT perform any action that may cause a hazard to the customer or make the
product unsafe.
4 Use proper safety devices to ensure your personal safety.
5 Always use approved tools and test equipment for servicing.
6 Never assume the product's power is disconnected from the mains power supply. Check
that it is disconnected before opening the product's cabinet.
7 Modules containing electrical components are sensitive to electrostatic discharge (ESD).
Follow ESD safety procedures while handling these parts.
8 Some products contain more than one battery. Do not disassemble any battery, or
expose it to high temperatures such as throwing into fire or it may explode.
9 Refer to government requirements for battery recycling or disposal.

Compliance Statement

Caution: This Optical Storage Product contains a Laser device. Refer to the product
specifications and your local Laser Safety Compliance Requirements.

General Descriptions

This Service Manual contains general information. There are 2 levels of service:
Level 1: Cosmetic / Appearance / Alignment Service
Level 2: Circuit Board or Standard Parts Replacement

Related Service Information

Service Web Site

BenQ Global Service Website:
eSupport Website:
http://support.benq.com/front/benqmain.asp
http://esupport.benq.com/v2
6