KTM 250 EXC 2024 Setup Instruction page 8

2 SETUP
6
Info
Make sure the cables and wiring are routed correctly.
–
Position the handlebar clamps. Mount and tighten the screws
evenly.
Guideline
Screw, handlebar
clamp
Info
The markings on the handlebar should be at the center
of the handlebar clamps.
Keep the installed gap widths equal when tightening.
(All EXC models)
–
Position the controls on the right half of the handlebar.
W00385-10
(All XC‑W models)
–
Position the controls on the right half of the handlebar.
W00386-10
(All EXC models)
–
Position the controls on the left handlebar half.
W00387-10
(All XC‑W models)
–
Position the controls on the left handlebar half.
W00388-10
M8 20 Nm (14.8 lbf ft)