Advertisement
–
Mount the washer and splint
I00471-10
–
Stick displacement sticker on the left and right of the side
cover.
(All special models)
–
Install the engine guard. (
–
Install the frame protector. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Make sure that the reflectors are glued on to the left and right
fork leg.
I00472-10
Info
The reflectors must not be covered by trim parts.
–
Attach the stickers included in the scope of supply (optional).
–
Charge the 12-V battery. (
Guideline
The 12-V battery must be fully charged before it is handed
over to the customer.
H02556-01
Info
The first charging process may take longer with a new
12-V battery.
–
Set kilometers or miles. (
–
Adjust combination instrument function. (
–
Set the clock. (
–
Add 2-stroke oil. (
–
Refuel. (
p. 33)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
co
.
p. 31)
p. 31)
p. 24)
p. 34)
p. 35)
p. 35)
p. 32)
SETUP 2
15
Advertisement
