Advertisement
2 SETUP
10
(All EXC models)
–
Connect plug
W00393-10
–
Insert the black and violet cables of the bulb included in
the separate enclosure into the socket and position it in
the turn signal indicator lamp.
S03673-01
–
Position the turn signal on the headlight mask on both
sides, mount nuts with washers and tighten.
–
Join plug-in connector
violet and brown cable colors of the turn signal cable har-
ness.
–
Join plug-in connector
the black and brown cable colors of the turn signal cable
harness.
–
Join plug-in connector
W00395-10
–
Connect plug-in connector
–
Install the headlight mask with the headlight. (
–
Disconnect tail light plug-in connector
harness.
–
Remove screws
W00396-10
4
with turn signal wiring harness.
5
of the left turn signal using the
6
of the right turn signal using
7
of the headlight.
8
of the turn signal switch.
9
bk
.
p. 29)
on the wiring
Advertisement
