Advertisement
3.19
Installing the engine guard (All special models)
3.20
Installing the frame protector
3.21
Opening 2-stroke oil tank cap
3.22
Closing 2-stroke oil tank cap
–
Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
H01638-10
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount screws
Guideline
Screw, frame protec-
tor
–
Secure the frame protector with cable ties.
S05492-11
–
1
Fold loop
–
Turn the 2-stroke oil tank cap counterclockwise and pull it up.
E00861-10
–
Put the 2-stroke oil tank cap on and turn it clockwise.
–
1
Fold loop
The 2-stroke oil tank cap engages.
E00861-11
1
.
M6
1
with the bushings and tighten.
M5
upward.
down.
WORK 3
10 Nm (7.4 lbf ft)
3 Nm (2.2 lbf ft)
31
Advertisement
