Sony SAT-A4 Operating Instructions Manual page 80

Back Panel (SAT-B3)
SATELLITE INI I _P_ AUOIO VIDEO I] _ t VHF_JHF iN I
.w=o-,
Connector Description Cable Type
SATELLITE IN Connects to the LNB on the Satellite Anteru3a. Solid Bare Copper
RG-6 Coaxial
(75-ohm/F-type)
LOW SPEED DATA Allows you to cormect your Digital Satellite Receiver to new Depends on future
technologies, as they are introduced. Additional accessories may applications
be required. (D-sub 9 pin)
VCR CONTROL Sends IR signal from Digital Satellite Receiver to VCR. Allows Audio mono
the Digital Satellite Receiver to automatically control your miniplug
VCR's recording functions when you record a program.
AUDIO (R)/(L) Connects your Digital Satellite Receiver to the right and left Audio (2)
OUT audio inputs of your audio or video component. (RCA-type)
VIDEO OUT Connects your Digital Satellite RecCtver to your TV or VCR's Video
video input. (RCA-type)
S-VIDEO OUT Allows you to connect your Digital Satellite Receiver directly S-Video
to your TV (if your TV has S-VIDEO IN). (4-pin mini DIN)
CH3/CH4 Switch When you use an RF connection, this setting determines the
TV channel on which programs from the Digital Satellite Receiver
can be viewed.
VHF/UHF IN Allows you toconnectyour Digital S atellite Receivertoyour RG-59 Coaxial
normal (terrestrial) TV or cable TV service. (75-ohm/F-type)
VHF(SAT)/UHF OUT Connectstoyour TV orVCR. RG-59 Coaxial
(T5-ohm/F-type)
.u
TEL LINE Connects your Digital Satellite Receiver to a telephone jack. Telephone (RJ-11)
This allows you to order pay per view programs.
AC IN Connects your Digital Satellite Receiver to a 120V AC outlet. AC
8O