Sony SAT-A4 Operating Instructions Manual page 62
Directv digital satellite receiver
Hide thumbs
Also See for SAT-A4:
- Operating instructions manual (96 pages) ,
- Operating instructions manual (96 pages)
Table of Contents
Advertisement
3
Select one of the following:
To Do This ,,,
Do This ...
Change the data service for the
Select the data service and then
current station
only
select RETURN.
Change
the data service for all
Select DEFAULT (then see
stations
"Changing
the Default Data
Service"
below).
Change
the baud rate for the
Select BAUD (then see "Setting
Digital Satellite Receiver's
wide
the Baud Rate" below).
band data port
Changing the Default
Data Service
The titles of the data services may be
different, based on the service being
provided.
Use the DEFAULT button to select a default data service for all stations
that provide
data services.
To change the data service for all stations:
1
Select DEFAULT from the Data Services screen.
2
Select a default data service.
LOW SPEEDDATA
IOATA1,DA A2
IIDATA3
IDATAS
DATA° IIDATA
DEFAULT D ATA
DATA2
DATA 3
DATA 4
DATA S
J
Setting the Baud Rate
The baud rates displayed may be different,
depending on which data port is being
used.
To set the baud rate for the Digital Satellite Receiver's data port:
1
Select BAUD from the Data Services screen.
2
Select a baud rate for the data port.
LOW SPEEDDATA
IOATA1
IIDATA2
IDATA JLDATA0
IDATA3,
l_
SETBAUDRATE
I
48002400
1 RETURN
62
Advertisement
Table of Contents
