Sony SAT-A4 Operating Instructions Manual page 52

Directv digital satellite receiver
Table of Contents

Advertisement

Locking Your System
DON'T FORGET YOUR PASSCODE.
You'll need this number to unlock your
system or to make any changes to the locks
and limits you've set. If you do forget your
passcode, call your program provider for
assistance,
To lock an unlocked system:
1
Select LOCK from the Set Locks and Limits screen.
2
Enter a four-digit passcode number. Use the 0-9 buttons to enter
the numerical value.
SETLOCKS AND LIMITS
[
SPENDING LIMIT I
I LOCK SYSTEM
| Enter Y our Four
i
i
I PAYPERV,EW
IONLOCKEO
Each number you enter appears as an asterisk (€¢), which keeps
your passcode secret.
3
When prompted,
enter your passcode
again. (This confirms your
selection of a passcode number.)
Your system is now locked, as indicated
by the closed padlock (_)
in
the Set Locks and Limits screen. All locks and limits you've set are now
in effect. The padlock also appears in the Program
Banner to remind
you of the locked status.
Overriding the System Lock
You can temporarily override any locks or limits that have been set if
you know the system passcode.
For example, if you try to watch a program on a locked station, a
message identifies the lock or limit exceeded. After you press the -4-
button, the Temporary Unlock window appears. By entering the
passcode
and then selecting when you want the system to
automatically
relock, you can temporarily unlock the system.
Note
If you override the system lock, you can reset the lock by turning the power off
and then on again. If you want to unlock the system on a more permanent
basis, follow the procedures under "Unlocking Your System" on page 53.
52

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sat-b3

Table of Contents