Sony SAT-A4 Operating Instructions Manual page 74

Displaying the
Programmable Codes
SAT-A4: The SAT-A4 remote control
can be programmed to control most
brands of TVs, cable boxes, VCRs, and
laserdisc players (LDP).
SAT-B3: The SAT-B3 remote control
cannot be programmed to control cable
boxes or laserdisc players.
You can also use the Setup Remote screen to display a list of codes you
can use to program the remote control to operate other components,
such as TVs and VCRs.
Note
These code numbers and instructions are also described in "Programming the
Remote Control" on page 85.
To display the list of programmable codes:
1
Select REMOTE CONTROL from the Setup Menu.
2 Select REMOTE COD_ESand then select the type of component you
want to use with the remote.
SETUP REMOTE
REMOTE SIGNAL IR ONLY [_
RFSECURITY CODE
REMOTE CODES
Selectthe categoryof
manufacturer c odes to
bedisplayed.
CABLE BOXCOOES
VCRCODES
LDPCODES
INSTRUCTIONS
3
4
5
Scroll through the list that appears to find the remote codes for the
manufacturer of your component. Press the -_- button to return to
the Set Up Remote screen.
To program the remote control, select INSTRUCTIONS and follow
the on-screen instructions.
Select OK to return to the Setup Menu.
74