Table of Contents
Advertisement
Changing the parameter setting on the tool (Field Setting mode)
NOTICE:
This function is available by default. If you have disabled the Field Setting mode on the computer,
enable the Field Setting mode beforehand. Refer to the instruction manual of "Makita Industry Tool Settings" for
how to configure.
NOTICE:
If the Field Setting mode is disabled, making settings on the tool is not available. When you press the
setting button, the values set on the tool are displayed in order.
NOTE: When the reversing switch lever is depressed in the clockwise rotation, the indicator shows the setting of
clockwise rotation.
When the reversing switch lever is depressed in the counterclockwise rotation, the indicator shows the setting of
counterclockwise rotation.
The current setting number is displayed on the indicator.
Every time you press the setting button, the indicator shows torque level, rundown level, shortest workable time
range, longest workable time range, and "Ad."
1
Fig.7
► 1 . Setting button 2. Indicator
You can change the parameters of the following setting items.
Setting item
Torque level
Rundown level
Shortest workable time range
Longest workable time range
NOTICE:
If "OP" (Loosening Auto Stop mode) is displayed on the indicator, torque level setting and rundown
level setting is not available. To set the torque level and rundown level, change the mode to Tightening Auto Stop
mode on the computer using "Makita Industry Tool Settings".
2
Display on the indicator
01 - 40
FF
L1 - L7
Lo / 0.1 - 9.9
Lo / -.-
HI / 0.1 - 9.9
HI / -.-
The torque level at which the Tightening
Auto Stop mode works.
The sensitivity of the fastener seating.
The shortest duration of the rotation when
you continue to pull the switch trigger.
The longest duration of the rotation when
you continue to pull the switch trigger.
9 ENGLISH
Description
Advertisement
Table of Contents
