Table of Contents
Advertisement
CC1312PSIP
SWRS293 – NOVEMBER 2023
8 Specifications
8.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
(1)
VDDS
Supply voltage
Voltage on any digital pin
V
Voltage on ADC input
in
T
Storage temperature
stg
(1)
Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply
functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.
If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully
functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime
(2)
All voltage values are with respect to ground, unless otherwise noted.
(3)
Including analog capable DIOs.
8.2 ESD Ratings
V
Electrostatic discharge
ESD
(1)
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2)
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
8.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
(1) (2)
Operating ambient temperature
(1) (2)
Operating ambient temperature
Operating supply voltage (VDDS)
Operating supply voltage (VDDS), boost mode
Rising supply voltage slew rate
Falling supply voltage slew rate
(1)
Operation at or near maximum operating temperature for extended durations will result in a reduction in lifetime.
(2)
For thermal resistance characteristics refer to
8.4 Power Supply and Modules
over operating free-air temperature range (unless otherwise noted)
PARAMETER
VDDS Power-on-Reset (POR) threshold
VDDS Brown-out Detector (BOD)
VDDS Brown-out Detector (BOD), before initial boot
VDDS Brown-out Detector (BOD)
(1)
For boost mode (VDDR =1.95 V), TI drivers software initialization will trim VDDS BOD limits to maximum (approximately 2.0 V)
(2)
Brown-out Detector is trimmed at initial boot, value is kept until device is reset by a POR reset or the RESET_N pin
12
Submit Document Feedback
(3)
Voltage scaling enabled
Voltage scaling disabled, internal reference
Voltage scaling disabled, VDDS as reference
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001
Charged device model (CDM), per ANSI/ESDA/JEDEC JS-002
Section
8.8.
(1)
Rising threshold
(2)
Rising threshold
(1)
Falling threshold
Product Folder Links:
(1) (2)
(1)
(2)
Maximum operating temperature with transmit
output power above +15 dBm (using the +20 dBm
(2)
PA)
VDDR = 1.95 V
+14 dBm RF output power
CC1312PSIP
MIN
MAX
–0.3
–0.3
VDDS + 0.3, max 4.1
–0.3
VDDS
–0.3
1.49
–0.3
VDDS / 2.9
–40
150
VALUE
All pins
±1000
All pins
±500
MIN
MAX
–40
105
–40
95
1.8
3.8
2.1
3.8
0
100
0
20
MIN
TYP
MAX
1.1 - 1.55
1.77
1.70
1.75
Copyright © 2023 Texas Instruments Incorporated
www.ti.com
UNIT
4.1
V
V
V
10
dBm
°C
UNIT
V
V
UNIT
°C
°C
V
V
mV/µs
mV/µs
UNIT
V
V
V
V
Advertisement
Table of Contents
