Evaluation Module Overview
1 Evaluation Module Overview
1.1 Introduction
The F28P55x LaunchPad (LAUNCHXL-28P55X) from Texas Instruments (TI) provides a great way to learn and
experiment with the F28P55x devices. The F28P55x device is a member of TI's C2000 family of microcontrollers
(MCUs). This 100-pin LaunchPad is intended to provide a well-filtered, robust design capable of working in
most environments. This document provides the hardware details of the F28P55x LaunchPad and explains the
functions, locations of jumpers, and connectors present on the board.
This kit is designed to explore the functionality of the F28P55x microcontroller. The LaunchPad can
be treated as a good reference design and is not intended to be a complete customer design. Full
compliance to safety, EMI/EMC, and other regulations are left to the designer of the customer's
system.
1.2 Kit Contents
The F28P55x Series LaunchPad Development Kit contains these items:
•
C2000 F28P55x Series LaunchPad development board (LAUNCHXL-F28P55X)
•
USB Type-A male to USB Type-C
•
Pinout map
1.3 Specifications
Table 1-1
summarizes the F28P55x LaunchPad specifications.
Parameter
Board supply voltage
Dimensions
Break-out power output
Assumed operating conditions
2
C2000 F28P55x Series LaunchPad Development Kit
Note
®
male cable
Table 1-1. LAUNCHXL-F28P55X Specifications
Value
5V
from one of the following sources:
DC
•
USB Connector (USB101) - USB Type-C cable connected to PC or other compatible
power source.
•
BoosterPack 1
•
BoosterPack 2
•
Auxiliary power connectors
5.5in x 2.3in x .425in (13.97cm x 5.84cm x 10.8mm) (L x W x H)
•
3.3V
to BoosterPacks, limited by output of TPS7A3701 LDO. This 3.3V plane is
DC
shared with on-board components. Total output power limit of TPS7A3701 is 1 Amp.
This kit is assumed to run at standard room conditions. The EVM runs at approximately
standard ambient temperature and pressure (SATP) with moderate-to-low humidity.
Copyright © 2024 Texas Instruments Incorporated
www.ti.com
SPRUJC0 – APRIL 2024
Submit Document Feedback