Elation 6+ Series User Manual page 13

I N S TA L L AT I O N G U I D E L I N E S
CLAMP INSTALLATION
This device features a mounting clamp attachment point built into the mounting bracket, as
well as a safety cable attachment point located on the rear face of the fixture above the
control panel.
OMEGA BRACKETS WITH CLAMP INSTALLATION
Insert the Omega Brackets into the matching holes on the yoke. Secure the Omega Brackets to
the fixture by turning each quick-lock fastener ¼ turn clockwise; making sure the fastener is
completely locked. Omega Brackets can be installed into the fixture base as illustrated below.
ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT
FALL IF THE CLAMP FAILS.
MOUNTING THE FIXTURE ON A TRUSS USING CLAMPS WITH OMEGA BRACKETS
When mounting the fixture to a truss, be sure to secure an appropriately rated professional
grade rigging clamp to the included Omega Brackets using an M10 or M12 screw fitted through
the center hole of the Omega Brackets. The fixture provides a built-in rigging point for a
SAFETY CABLE (not included). Be sure to use the designated rigging points for the safety
cable and never secure a safety cable to a carrying handle.
SAFETY CABLE
13