Date/time
Date
Time
Daylight saving time
Cancel
9.
Press the right-hand selection button, OK, to confirm
the change.
◁
The control has stored the changed date.
Date/time
Date
Time
Daylight saving time
Back
10.
If the highlighted value that is flashing is correct, press
the right-hand selection button OK again.
◁
The left-hand selection button now has the function
Back.
11.
Press the left-hand selection button Back repeatedly
to revert back to the previous selection level and to
access the basic display from selection level 1.
0020131979_01 Operating instructions
5
Operating and display functions
14.03.11
The path details given at the start of each function descrip-
tion indicate how you reach this function in the menu struc-
08
:15
ture.
Off
You can use the left-hand selection button Menu to set the
operating and display functions.
OK
5.1
5.1.1
Menu → Information → System status
–
Under System status, you can read a list containing the
current values for the system: status, water pressure, hot
water generation and the current values for HEATING 1.
14.03.11
There is also information under System status
08
:15
–
regarding the active time period (Auto day temp until),
Off
–
regarding exceptions in the timer programs that you may
have set using the Days away from home function.
Change
Only the desired temperatures for Day temperature and Set-
back temperature can also be set directly under System
status. All other values are set in other places in the menu
structure, as described in the following sections.
5.1.2
Menu → Information → System status → Status
–
If no service is required and no faults have occurred, the
value OK is shown next to Status. If a service is required
Information
Reading the system status
Reading the list of status messages
15