Additional Functions; B Status Codes - Vaillant ecoTEC plus VU Series Operating Instructions Manual

INFORMATION menu item
Software version
SETTINGS menu item
Chimney sweep mode
Installer level
Language, clock, display
settings
A.1 Additional functions
Validity: Product with connected sensoROOM pure (VRT 50/2)
CONTROL menu item
Heating timer
Time programme assistant Programming of the desired temperature for the weekly blocks

B Status codes

Note
Since the code table is used for various products, some codes may not be vis-
ible for the product in question.
The code table only shows an extract of the entire code.
Code
S.000
S.002
S.003
S.004
S.006
S.007
S.008
S.012
S.013
S.014
S.016
S.017
0020308119_02 Operating instructions
Displays the software versions.
→ Adjustable heat load
→ Max. DHW output
→ Min. DHW heat input
→ Language:
→ Date:
→ Time:
→ Display brightness:
→ Daylight saving time:
On: Heating mode is permanently switched on.
→ Weekly planner
Monday-Friday and Saturday-Sunday.
Meaning
There is no demand for heating mode.
Heating mode is active and the heating pump is in prerun mode.
Heating mode is active and the unit ignites.
Heating mode is active and the burner is operating.
Heating mode is active and the fan is in overrun mode.
Heating mode is active and the heating pump is in overrun mode.
Heating mode is active and the unit is in burner anti-cycling time.
The domestic hot water draw-off is active and the heating pump is in
prerun mode.
The domestic hot water draw-off is active and the unit ignites.
The domestic hot water draw-off is active and the burner is operating.
The domestic hot water draw-off is active and the fan is in overrun
mode.
The domestic hot water draw-off is active and the heating pump is in
overrun mode.
19