For Recipcuiotion Vce Eeesesecssesseseeseeeee - GE PVM1790 Installation Instructions Manual

Installation Instructions
NOTE: The exhaust adaptor with damper is not
needed for recirculating models. You may want
to save them for possible future use.
Remove and save screws that hold blower plate
to the oven.
v <= Blower Plate Screws
Roll the blower unit 90° so that fan blade openings
are facing toward the front of the oven.
BEFORE: Fan Blade
Oven
Slide the blower plate from under its retaining
flange and lift it off. Remove and save screw that
holds the blower motor to oven.
Retaining
Blower Motor
Screw
AFIER: Fan Blade
Openings Facing
Forward
NOTE: Make sure wires remain routed in the grooves
of the motor frarne.
20