Advertisement
CONFIRM SUPPLIED ACCESSORIES
NAMES AND FUNCTIONS OF PARTS
@
Output cable x 1
@® Control cord x 1
(PD-102 (except for Singapore and multi-
voltage models) and U.S. and Canadian
models of PD-202
only: Not available with models for military zones
(multi-
voltage types)}
@® AAAVROS dry cell batteries x 2 (PD-202 only)
@® Remote control unit x 1 (PD-202 only)
PUT BATTERIES INTO THE REMOTE
CONTROL UNIT (PD-202 ONLY)
Open the lid of the battery compartment on the rear of the remote
control unit, and insert the batteries, taking care to align the (+)
and (—} polarities correctly.
NOTES:
®
{n order to prevent battery leakage, remove the batteries when
not using the remote control unit for an extended period {one
month or more).
If leakage occurs, carefully wipe away any
battery fluid inside the compartment, and replace the batteries
with new ones.
®@ Do not allow books or other objects to rest on top of the re-
mote control unit, since the buttons may be depressed, causing
faster exhaustion of the batteries.
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always
insert
batteries
into the battery compartment
correctly matching
the positive
@
and negative iS)
polarities,
as
shown
by the
display
inside
the
compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on brand.
Do not mix different brands of
batteries,
FRONT PANEL
@ POWER STANDBY/ON switch and STANDBY
indicator
@ Disc tray
@ OPEN/CLOSE button (4)
@ Remote sensor
Receives the signal from the remote control unit.
@ The PD-102 is not equipped with the remote sensor.
© Digit buttons
{1 - 10, >10)
© COMPU/AUTO EDIT button
@ DISPLAY OFF button
© TIME button
@ REPEAT button
@ CLEAR button
@) PEAK SEARCH button
42 Stop button (m)
@ Pause button (11)
@ Play button (>)
4) Track/Manual search buttons
(td </p> PP)
( PROGRAM button
@ RANDOM button
@ Headphones jack (PHONES)*
Headphones volume control (LEVEL}*
a) HI-LITE scan button
*
The multi-voltage, Singapore and Australian models of the PD-102
are not equipped with the headphones jack and headphones
volume control.
When operating the remote control unit, point the unit's infrared
signal transmitter at the remote control receiver on the front panel
of the player. The remote control unit can be used within a range
of about 7 meters (23 feet) from the remote sensor, and within
angles of up to about 30 degrees.
6
<PRB1182>
En
NOTE:
if the remote control sensor window is in a position where it
receives strong light such as sunlight or fluorescent light, control
may not be possible.
Notes
for PD-162:
Operate
the PD-102
using the remote
contro! unit which
accompanies the amplifier. (See page 5.)
tive Se
Advertisement
