Tp 700 Control System; Calconnect Wifi Set Up - Cal Spas SWIM Owner's Manual

Cal Connect RF Set Up Guide
Congratuations! Welcome to Cal Connect Control My Spa, the smart control system for spa
monitoring on the go. With Cal Connect you will be able to control/monitor water temperture,
control pump operation, adjust filtration, and monitor/control any activity occuring within your spa.
This Quick Start guide will help you with inital set up of your RF module.
NOTE: The Cal Connect Module works on 2.4 Ghz networks only. Inspect your router to
42315_Rev. C
confirm 2.4 Ghz support.
ControlMySpa™
The Cal Connect uses two modules, one that connects to the home router and one that connects to
the spas control box, both modules must have matching serial numbers located on the back of each
of the modules. Connect your home module first before proceeding.
GATEWAY ULTRA Hardware Connections
ControlMySpa™ Spa Owner User Guide
GATEWAY ULTRA Home
Module Router
HOME
GATEWAY ULTRA Module (side view)
LED Light
Power Ethernet
Cord Cable
Home Router
5
BP Control BP Control GATEWAY ULTRA GATEWAY ULTRA
System System Module Module
SPA
GATEWAY ULTRA Module (side view)
LED Light
RS485 Power/Data Cord
BP Control
System
55
55