Important Safety Instructions - Thermador Professional PH Series Installation Instructions Manual

4 IMPORTANT SAFETY INSTRUCTIONS
APPROVED FOR ALL RESIDENTIAL APPLIANCES
FOR RESIDENTIAL USE ONLY
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.
IMPORTANT: Save these Instructions for the Local Electrical Inspector's use.
INSTALLER: Please leave these Instructions with this unit for the owner.
OWNER:
Please retain these instructions for future reference.
2. WARNING
If the information in this manual is not
followed exactly, fire or shock may result
causing property damage or personal injury.
Do not repair or replace any part of the
appliance unless specifically recommended
inthe manuals. Improper installation, service
or maintenance can cause injury or property
damage. Refer to this manual for guidance.
All other servicing should be done by a
qualified technician.
Unit is heavy and requires at least two people
or proper equipment to move.
Hidden surfaces may have sharp edges. Use
caution when reaching behind or under
appliance.
This appliance complies with one or more of
the following Standards:
¢ UL858, Standard for the Safety of
Household Electric Ranges
¢ UL923, Standard for the Safety of
Microwave Cooking Appliances
¢ UL507, Standard for the Safety of
Electrical Fans
¢ ANSI Z21.1-American National
Standard for Household Cooking Gas
Appliances
¢ CAN/CSA-C22.2 No. 113-M1984 Fans
and Ventilators
¢ CAN/CSA-C22.2 No. 61-M89 Household
Cooking Ranges
Itis the responsibility of the owner and installer
to determine if additional requirements and/
or standards apply to specific installations.
4 SAFETY WARNING
Turn off power circuit at service panel and
lock out panel, before wiring this appliance.
REQUIREMENT. 120 VAC, 60 Hz20A
4u WARNING
To reduce the risk of fire,
use only metal duct work.
lf required by the National Electrical Code (or
Canadian Electrical Code), this appliance
must be installed on a separate branch circuit.
Installer - show the owner the location of the
circuit breaker or fuse. Mark it for easy
reference.
Remove all tape and packaging before using
the appliance. Destroy the packaging after
unpacking the appliance. Never allow children
to play with packaging material.
Never modify or alter the construction of the
appliance. For example, do not remove
leveling legs, panels, wire covers or anti-tip
brackets/screws.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event
of an electrical short circuit, grounding reduces
the risk of electric shock by providing an
escape wire for the electric current.
This appliance is equipped with a cord having
a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is
properly installed and grounded.