Table of Contents
Advertisement
B - SAFETY INSTRUCTIONS
ELECTROMECHANICAL EQUIPMENT USED AS THE SUBASSEMBLY OF AN
- This equipment can be associated with a
welding installation, in which case it is
covered by safety instructions described in
the instructions for the welding installation
1 - SERVICING
Check often that the insulation and
connections of the electrical equipment
and accessories are in good condition:
plugs, cables, flexible cables, sheaths,
connectors,
workpiece clamps, electrode holders or
torches...
Maintenance
insulating sheaths and covers should
never be carried out in a makeshift
manner.
Have defective accessories repaired by
a specialist or, better still, replace them.
Periodically
connections are properly tightened and
do not overheat.
Make sure that no spray or water enters into the electrical box of the carriage.
B-2
INSTALLATION.
extension
cables,
and
repair
work
check
that
electrical
WARNING !
Be careful not to crush your fingers
IP23 PROTECTION
- If this equipment is used in other cases, a
minimum
respected, in particular :
2 - PERSONAL PROTECTION
RISK OF EXTERNAL INJURY.
The operator must be properly dressed
and protected for the work he is
carrying out.
Ensure that no part of the operator's
body or of his assistant's body can come
in contact with metal parts and
workpieces which are energized or
on
which could accidentally become
energized and/or which are moving.
Do not wrap electrical cables around
your body.
of
instructions
must
WELDYSTIFFENER
8695 5876 / E
be
Advertisement
Table of Contents
