Table of Contents
Advertisement
CABLE CONNECTIONS
2)
Make cable connections as shown in the diagram below.
AC adapter
our
Te
j
m
When
special effects are to be
used, connect an effector to the
From AC outlet
PATCH panel on the right side of
the back panel.
Back panel of the unit
a)
Connect the AC adapter to the DC IN
socket on the back panel of the unit.
b)
Connect. the tone boxes and the piano
with the signal cables.
Left speaker..... CH-1 (L) on the back
If Cannon type plugs are to be used for
this purpose, connect them to the Can-
From AC outlet
non type terminals on the back panel.
c)
Plug the tone
boxes
and
the AC
adapter in AC outlets.
KPS-1200M Tone Box
KPS-1200M Tone Box
d)
Set all power switches to ON.
[z]
Advertisement
Table of Contents
