Table of Contents
Advertisement
(D)
Wood screw used
|]
Screw used
Cheek block
Left cheek block
front top board of EP308S.
from Strings.
Connector
After the Strings has been screwed to EP308S, plug the connector to EP308$ in the loca-
tion indicated in the drawing.
Then, reinstall the cheek blocks and the cover to the Strings.
ten each of the cheek blocks of Strings. When reinstall-
ing the cheek blocks, be sure to insert these screws in
the correct positions.
The expression pedal must be connected when Strings is used. This pedal is connected
to the EXP. PEDAL terminal on the connector panel (the metallic panel on the back of the
unit).
NOTE:
See page 7.
Advertisement
Table of Contents
