3. BEFORE USE
4. ASSEMBLY PROCEDURES
The body of EP308 is constructed so that it can be
EP308 ASSEMBLY
pivoted, making transportation and storage easier. This
feature is a completely new one, but great care must be
taken when using it. Be sure to read this owners man-
ual carefully, with particular attention to page 8.
Canti lever
Horizontal stay
Pedal wire
1)
Unfasten the anti-pivot brackets.
2)
Mount the lifting rod on the tip of the pedal wire
NOTE
—
m te era en ee
en en
to the horizontal stay.
The body can be pivoted when these brackets are unfas-
tened, so be careful not to jar the body or the legs.
3)
Set the pedal stopper.
the body and carefully rotate it into position.
NOTE:
After rotating the body into position, confirm that the lift-
ing rod is properly inserted into the body.