Lenovo 10HQ User Manual page 74

3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer
cover engage the rails on the chassis. Then, push the cover to the front of the computer until it snaps
into position.
Figure 34. Installing the computer cover
4. Install the screws to secure the computer cover.
5. If there is any locking device available, lock the computer cover. See "Locking the computer" on page 25.
6. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 1.
7. Update your configuration. See "Using the Setup Utility program" on page 29.
8. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping the computer current" on page 22.
64
Lenovo S200 User Guide