Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Airlink101 AGIGAUSB
Summary of Contents for Airlink101 AGIGAUSB
- Page 1 USB 2.0 Gigabit Network Adapter Model # AGIGAUSB User’s Manual Ver. 1A...
-
Page 2: Table Of Contents
Introduction ... 4 Package Contents ... 4 Specifications ... 4 Network Specification... 4 Host Interface... 4 Supported operating systems ... 4 LED Indicators... 4 Power Requirement ... 5 EMC Certification ... 5 Installation ... 6 Verify Driver Installation ... 12 Technical Support ... - Page 3 REGULATORY STATEMENTS FCC Certification Part15, Class B The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. FCC Part 15 Registration This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: •...
-
Page 4: Introduction
Introduction The USB 2.0 Gigabit Network Adapter (hereafter referred to as the Gigabit Adapter) is specifically designed to plug into any available Universal Serial Bus port of a desktop or laptop PC. The Gigabit Adapter is for users who wish to connect to a 10Mbps, 100Mbps or 1000Mbps Fast Ethernet LAN using the convenience and ease of USB technology. -
Page 5: Power Requirement
100Mbps: Appears as solid orange when the device is connected to 100Mbps network; blinking orange when transmitting data. Gigabit: Appears as solid green, when the device is connected to Gigabit network; blinking green when transmitting data. Power Requirement Operating Voltage: 5V DC Operation Mode: 425mA (Max) Physical specification Dimension: 3.2"(L) x 2.2"(W) x1"... -
Page 6: Installation
Installation The following steps and screen shots are for Windows XP. Steps for Windows 2000 are similar unless noted otherwise. Note: Do not connect the USB 2.0 Gigabit Network Adapter to your computer until you’ve reached the appointed step. If the Gigabit Adapter is connected already, Windows will detect the Adapter and request for a driver. - Page 7 Step 3 Click Next at the welcome screen. Step 4 Click Next to accept the default destination location for the driver to be installed in or click Browse to select the desired location.
- Page 8 Step 5 Click Next to accept the Program Folder for the driver. Step 6 Click Continue Anyway at the Windows Logo Testing prompt. (For Windows 2000, click Yes at the Digital Signature Not Found prompt).
- Page 9 Step 7 Click Finish to complete the installation wizard. Step 8 Connect one end of the Gigabit Network Adapter to your computer’s USB port and connect the other end to a hub/switch/router. Step 9 At the Found New Hardware Wizard window, select No, not this time and click Next.
- Page 10 Step 10 Select Install the software automatically (Recommended) and click Next. For Windows 2000, select Search for a suitable driver for my device (Recommended) and click Next. Then check on the CD-ROM drives check box and click Next. Step 11 Click Continue Anyway at the Windows Logo Testing prompt.
- Page 11 Step 12 Click Finish to complete the installation. Step 13 Restart your computer to activate the Gigabit Network Adapter.
-
Page 12: Verify Driver Installation
Verify Driver Installation To verify if the driver has been installed successfully, please perform the following steps. Step 1 Right-click on My Computer from your desktop and select Properties. Step 2 Select the Hardware tab and click on Device Manager. - Page 13 Step 3 Expand Network adapters from the list and verify that 10/100 Gigabit USB2.0 Network Adapter is listed and no yellow question mark is beside it. Congratulations! You have successfully installed the USB 2.0 Gigabit Network Adapter.
-
Page 14: Technical Support
AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under...