Preparing The Psp™ System For Use; Insert The Battery Pack - Sony PSP-1008 Quick Reference

02
Preparation
Preparing the PSP™ system for use
Charging the battery
Before using the PSP™ system for the first time after
purchase, you must follow these steps to charge the
battery.
Caution
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• Do not plug the AC Power Cord for the PSP™ system into
an electrical outlet until you have made all other
connections.
Notice
Do not use the PSP™ system with the AC Adaptor when the
Battery Pack is not inserted in the system. If the AC
Adaptor is disconnected suddenly, it may result in damage
to the system.
6
1

Insert the Battery Pack.

While holding down the PUSH button, slide the battery
cover in the direction of the arrow. Align the bottom
surface of the Battery Pack with the system to attach the
battery.
1
2
Align the tabs, and then slide the cover in the direction of
the arrow until it locks firmly into place.
4
3
UMD
UMD