Preparing the PSP™ system for use
Before using the PSP™ system for the first time after purchase, you must
follow these steps to charge the battery.
Getting started 1: Inserting the battery pack
1
Remove the battery cover.
Hold down the push button and slide
the battery cover open.
2
Insert the battery pack.
Align the bottom surface of the
battery pack with the system to
attach.
3
Replace the battery cover.
2 Slide the battery cover in the
direction of the arrow until it
locks firmly into place.
1 Align the tabs.
Preparing the PSP™ system for use
GB
UMD
UMD
UMD
23