Preparing The Psp™ System For Use; Insert The Battery Pack; Remove The Battery Cover - Sony PSP Quick Reference

02
Preparation
Preparing the PSP™ system for use
Charging the battery
Before using the PSP™ system for the fi rst time after
purchase, you must follow these steps to charge the
battery.
Caution
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• Do not plug the AC Adaptor for the PSP™ system into an
electrical outlet until you have made all other
connections.
1

Remove the battery cover.

While holding down the release button, slide the battery
cover in the direction of the arrow.
Release button
6
2
1
2

Insert the Battery Pack.

Align the bottom surface of the battery pack with the
system to attach the battery.
2
1
Align the tabs of the battery cover with the system and
snap it in place.
3
4