Table of Contents
Advertisement
IMPORTANT NOTES
in addition to the items listed under "USING THE UNIT SAFELY" on page 2-3, please read and
observe the following:
,
Power Supply
Before connecting this unit to other devices,
turn off the power to all units. This will help
prevent malfunctions and/or damage to
speakers or other devices.
Placement
Using the unit near power amplifiers (or
other equipment containing large power
transformers) may induce hum. To alleviate
the problem, change the orientation of this
unit; or move it farther away from the source
of interference.
Do not expose the unit to direct sunlight,
place it near devices that radiate heat, leave it
inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Excessive
heat can deform or discolor the unit.
To avoid possible breakdown, do not use the
unit ina wet area, such as an area exposed to
rain or other moisture.
Maintenance
For everyday cleaning wipe the unit with a
soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn
dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure
to wipe the unit thoroughly with a soft, dry
cloth.
Never use benzine, thinners, alcohol or
solvents of any kind, to avoid the possibility
of discoloration and/or deformation.
Additional Precautions
Use a reasonable amount of care when using
the unit's buttons, sliders, or other controls;
and when using its jacks and connectors.
Rough handling can lead to malfunctions.
When connecting / disconnecting all cables,
grasp the connector itself—never pull on the
cable. This way you will avoid causing
shorts, or damage to the cable's internal
elements.
When you need to transport the unit, pack it
in shock-absorbent material. Transporting
the unit without doing so can cause it to
become scratched or damaged, and could
lead to malfunction.
Advertisement
Table of Contents
