Table of Contents
Advertisement
OPERATION
Before playing, be sure to wrap the cable around
3. Turn on the [GR].
the guitar strap near the strap hook. This will
eliminate any unnecessary strain on the cable or
the GK-2A.
The Power indicator on the Controller will
light and you're ready to go.
* The Power Indicator will not light unless...
(1)
the GK-2A is connected to the [GR]
using the C-13A/B and
(2)
the [GR] is switched on.
2. Connect the large plug of the supplied
(short) guitar cord to the output jack on the
guitar, and the smaller plug to the Normal
Guitar Input Jack on the Controller.
Cord the Normal Guitar
*
This connection is necessary not only for mixing
the guitar's straight sound with the synthesizer
sound, but also for connecting the guitar's
ground and the GK-2A's ground. Always make
this connection whether you need the guitar's
straight sound or not.
19
Advertisement
Table of Contents
