Changing Channels - VTech vt9241 User Manual

OPERATING INSTRUCTIONS
3. Press the LINE key to return to the
remaining call.
If you want to end the entire Confer-
ence call, press OFF on the Handset
(or Base) while both Lines are active.
CAUTION: If the Handset and
Speakerphone are on the same
call, a loud squeal due to feed-
back may occur unless there is
reasonable separation between
the two components.

CHANGING CHANNELS

0
TONE
HOLD CHAN
PGM CONF
MEM
If you notice interference when using
your Handset, press CHAN to switch
to a clear channel. This function is only
available when you are on a call or us-
ing Intercom.
OPER
INT.COM
REDIAL
PAUSE
23