Operating Instructions; Making Calls - VTech vt9241 User Manual

OPERATING INSTRUCTIONS

MAKING CALLS

From the Handset
1. Pick up the Handset and press
LINE1 or LINE2.
INT.COM/PAGE
LINE 1
OFF
FLASH
1 2
ABC
4 5
GHI JKL
2. When you hear a dial tone, dial the
number. The LINE key you pressed
on Handset will light up and the cor-
responding LINE on Base Unit will
double Flash.
If you make a mistake when dialing,
press OFF to hang up, then press
LINE1 or LINE2 to get dial tone again.
You must always press LINE1 or LINE2
before you can dial a call on the Hand-
set.
Disconnecting
To end a call,
INT.COM/PAGE
LINE 1
OFF
FLASH
1 2
ABC
4 5
GHI JKL
900
MHz
CORDLESS
LINE 2
FLASH
3
DEF
6
MNO
900
MHz
CORDLESS
LINE 2
FLASH
3
DEF
6
MNO
13
1. Press OFF on the Handset;
OR,
2. Place the Handset back in the Base
Unit cradle.
From the Base
7 8
PQRS
0
TONE
FLASH
LINE 1
MIC
The Base Unit allows you to make and
receive calls without using the Hand-
set. You can use the Speakerphone on
Base while the Handset is in or out of
the Base.
1. Press the LINE1 or LINE2 on the
Base Unit.
2. You will hear the dial tone over the
speaker.
3. Adjust the volume controls on the
face of the Base Unit if necessary.
4. Dial the number on the dial pad of
the Base Unit.
5. When the party answers, speak to-
ward the microphone.
9
TUV WXYZ
OPER
FLASH
LINE 2
OFF