Data Port - VTech vt9241 User Manual

DATA PORT

Your VT 9241 has a convenient feature:
a Data Port built into the Base Unit. This
port provides an easy way to connect
your fax machine, modem, or other tele-
phone device for direct access to Line2.
The Data Port is a standard RJ-11 jack,
and is located on the back of the Base
Unit.
RINGER
LINE 1 LINE 2
HIGH OFF HIGH OFF
LOW LOW
The Data Port only provides access to
Line2, so you must have an active line
connected to the LINE2 input on the
back of the VT 9241 Base. To use the
Data Port for access to dial tone on
Line2, simple connect a standard
phone cord, with RJ-11 connectors,
from the Data Port to your fax machine,
modem, or other telephone device.
RINGER
LINE 1 LINE 2
HIGH OFF HIGH OFF
LOW LOW
9V DC
AC ELECTRICAL
OUTLET
NOTE:
While the Data Port is being used,
accidental access of Line2 by the
VT 9241 or extension phone shar-
ing the same line may interrupt a
fax, modem or data transmission.
DATA PORT
L1/L2 L2
9V DC TEL.LINE DATA PORT
DATA PORT
L1/L2 L2
TEL.LINE DATA PORT
26