Install The Protector System E (Safety Sensors) - Chamberlain WhisperDrive WD962KD Owner's Manual

Table of Contents

Advertisement

IHSTALLATmOH
STEP
1 1
Install
The
Protector
System
_
(Safety
Sensors)
The safety reversing sensor must be connected and
aligned correctly before the garage door opener will
move in the down direction.
IMPORTANT INFORMATION ABOUT
THE SAFETY REVERSING SENSOR
When properly connected and aligned, the sensor will
detect an obstacle in the path of its electronic beam.. The
sending eye (with an amber indicator light) transmits an
invisible light beam to the receiving eye (with a green
indicator light).. If an obstruction breaks the light beam
while the door is closing, the door will stop and reverse to
full open position, and the opener lights will flash 10 times..
The units must be installed inside the garage so that the
sending and receiving eyes face each other across the
door, no more than 6" (15 cm) above the floor.. Either can
be installed on the left or right of the door as long as the
sun never shines directly into the receiving eye lens..
The mounting brackets are designed to clip onto the track
of sectional garage doors without additional hardware..
Be sure poweris NOTconnectedto the garagedoor opener
BEFORE installing the safety reversingsensor.
To preventSERIOUS INJURYor DEATHfrom a closing garage
door:
- Correctlyconnectand align the safety reversingsensor This
requiredsafety deviceMUSTNOTbe disabled,.
- Installthe safety reversing sensor so beamis NOHIGHER
than 6" (15 cm) abovegaragefloor.
If it is necessary to mount the units on the wall, the
brackets must be securely fastened to a solid surface such
as the wall framing.. Extension brackets (see accessories)
are available if needed. If installing in masonry
construction, add a piece of wood at each location to
avoid drilling extra holes in masonry if repositioning is
necessary..
The invisible light beam path must be unobstructed No
part of the garage door (or door tracks, springs, hinges,
rollers or other hardware) may interruptthe beam while
the door is closing.
I
Safety Reversing Sensor
Invisible Ught Beam
6" (15 cm) max,
Prelectlan Area
abov_ floor
Facing the door from inside the garage
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Whisperdrive wd962kld

Table of Contents