Batteries; Battery Care And Maintenance; Replacing The Handset Battery - VTech t 2435 User Manual

Vtech t2435: user guide
Hide thumbs Also See for t 2435:
Table of Contents

Advertisement

Batteries

Battery Care and Maintenance

Your Handset battery should remain charged up to seven days. Average talk
time on a fully charged battery is six hours.
The Battery needs charging when:
— A new battery is installed in the Handset.
— The phone beeps twice every five seconds.
— The screen displays BATTERY LOW and the low battery icon.
Place the Handset in its Base so the CHARGING light turns on.The Battery
is typically fully charged in 12 hours.
You can keep the battery fully charged by returning the Handset to its Base
after each use.
If you repeatedly get a low battery indicator, even after charging overnight, the
battery should be replaced. Use only VTech batteries.
CAUTION: To reduce the risk of fire or injury to persons or damage to the
telephone, read and follow these instructions carefully:
Charge the battery provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the User's Manual.

Replacing the Handset Battery

1. Remove the battery compartment cover on the Handset by pressing on the
indentation and sliding the cover downward.
2. Lift out the old battery and disconnect.
3. Align the two holes in the new battery's plug with the socket pins, and snap
the plug into place. Place the battery in the compartment with the wires in the
ower right corner, along the bottom of the battery.
4. Replace the cover by sliding it up into place.
5. The new battery must be charged before using the phone. Place the Handset
in its Base and allow it to charge for at least 12 hours the first charge. The
telephone might operate before that, but for best performance, let the battery
charge fully.
20

Advertisement

Table of Contents
loading

Table of Contents