Carrier TB-24 Installation And Operation Manual page 20

Adjusting the time and day of the week
1. Press and hold the [C/F-Prog] button. The word "Clock" will appear on display, and the HOURS will flash.
Hours
2. Use the [+] or [-] buttons to adjust the hours.
Minutes
3. Press the [C/F-Prog] button again. The MINUTES will flash.
4. Use the [+] or [-] buttons to adjust the hours.
Days
5. Press the [C/F-Prog] button again. The DAYS will flash.
6. Use the [+] or [-] buttons to select the day.
7. If Technician Setting P107 is not set to "00" (program is enabled), press the [C/F–Prog]
button to enter programming procedure. Be sure to follow the right programming
procedure, suitable for the program type and features selected by Technician Settings.
Section C – "EU Type"
Section D – "US Type"
Otherwise, press the [C/F-Prog] button to return to normal display.
Adjusting "EU type" daily programs
Start time
1. Press the [C/F–Prog] button. The programmed weekday(s), "Prog 1" indicating the first
program event of the day and the word "Start" will appear on display.
The HOURS will flash.
Note: If this is the first time a program is being set, the symbols "--" will flash.
2. Use the [+] and [-] buttons to adjust the start time hours of the first event.
3. Press the [C/F–Prog] button again. The MINUTES will flash.
4. Use the [+] and [-] buttons to adjust the start time minutes of the first event.
ComfortVu™ BACnet Thermostat Model Standard TB-24 (24 Vac)Carrier Proprietary and Confidential
Installation and Operation Guide
16
CARRIER CORPORATION ©2024
All rights reserved