Removing A Creator Framebuffer - Sun Microsystems Ultra 1 Series Upgrade Manual

Removing a Creator Framebuffer

!
If the Sun Ultra 1 Series system being upgraded has a Creator framebuffer, it
must be removed and transferred to the upgraded system.
Caution – The Creator framebuffer card contains electronic components that
may be extremely sensitive to static electricity.
Always wear a grounding strap when you handle a Creator card.
1. Remove the two screws and washers securing the Creator framebuffer to
the back panel (Figure 2-4).
Securing screws
Creator card
Figure 2-4 Preparing to Remove the Creator Card
2. Unlock the card retainers (Figure 2-4).
System Board and Component Removal
Card retainer (2)
UPS slot
2
11