Samsung AR07CSDAFWKN Service Manual page 30

Disassembly and Reassembly
No Parts
3 Fan
&
Motor
4 Heat Exchanger
&
Compressor
3-4
Procedure
4) Detach several connectors from the PCB
of Ass'y Control Out.
5) Loosen 2 screws (CCW) fixed to assemble
Ass'y Control Out with Partition.
(Use +Screw Driver.)
1) Loosen the fixing nut (CW) and detach
the Fan.
(Use Monkey Spanner.)
2) Loosen 4 fixing bolts and detach the
Motor. (Use +Screw Driver.)
3) Loosen 2 fixing screws and detach the
Bracket Motor. (Use +Screw Driver.)
1) Release the refrigerant at first.
2) Disassemble the Inlet and Outlet Pipe by
welding.
3) Loosen the fixing 3 screws of the
Heat Exchanger. (Use +Screw Driver.)
4) Detach the Heat Exchanger.
Befor you disassemble the pipes and
Condensor, be sure that there should be
no refrgerant remained in the unit.
5) Loosen 3 nuts of the Compressor.
(Use Monkey Spanner.)
6) Detach the Compressor.
Remark
Samsung Electronics