Answering system operation
Audible indicators
Your telephone system gives you voice prompts for feature operations and voice confirmations when
• If you have caller ID
you press a button or complete an operaton .
servce the clock wll
Setting the clock
be set automatcally
wth ncomng calls .
You can also set
the clock manually .
Be sure to correctly
program the year .
• To ncrease or
decrease the
remote access code
by ncrements of 10,
press and hold the
SKIP or REPEAT
key .
• Press and hold
CLOCK about
two seconds then
About announcements
release to ext clock
settng at any stage
and the new settng
wll be saved and
announced .
26
1 . Make sure the answerng system s on .
2 . Press CLOCK . The system announces the clock settng (e .g . day, tme and year), then announces:
"To set the clock, press CLOCK."
3 . Press CLOCK . The system announces the current day .
4 . Press SKIP or REPEAT untl the system announces the correct day, then press CLOCK . The
system announces the current hour .
5 . Press SKIP or REPEAT untl the system announces the correct hour, then press CLOCK . The
system announces the current mnute .
6 . Press SKIP or REPEAT untl the system announces the correct mnute, then press CLOCK . The
system announces the current year .
7 . Press SKIP or REPEAT untl the system announces the correct year, press CLOCK . The system
announces the current clock settng and exts the clock menu .
•
If you choose not to record an announcement, the system answers wth the pre-recorded
announcement "Hello. Please leave a message after the tone." You may use ths announcement, or
record one of your own .
www.vtechphones.com